Jadwal Pelatihan Advanced Oil and Gas Production System Tahun 2024

• Oil and gas production system

• Oil gas production

• Production

ABOUT THE COURSE/pelatihan Oil gas production pasti jalan

The rapidly increasing worldwide demand for natural gas as an energy source requires expertise in gas engineering technology. Incorporating a balance between theory and application, course emphasis is on training participants for immediate application of acquired techniques to field problems.

Production is defined as the operations involved in bringing well fluids to the surface and preparing the fluids for transport to a refinery via pipelines or trucks. The first step in production is to start the well fluids flowing to the surface (called “well completion”). Well servicing and workover consists of performing routine maintenance operations (such replacing worn or malfunctioning equipment) and performing more extensive repairs, respectively. Well servicing and workover are an intermittent step and necessary to maintain the flow of oil and gas. Next, the fluid must be separated into its components of oil, gas, and water; stored; and treated (for purification), measured, and tested before being transported to the refinery.

This training will provide the principle and yet some practical and theoretical aspect that can be applied on daily work faced by production engineers and supervisor in the oil industry.

SUBJECT LEARNED/pelatihan G26Production terbaru

1. All aspects of completions are covered in sufficient detail to permit participants to review his/her current practices
2. The fundamental concepts of production operations and their proper application in the field
3. Production equipment such as wellhead, tubing and packers, well completions and workover as well as well test and problems, production logging and cementing will also covered
4. Production logs and how and when to use them; evaluation techniques for cement bond logs and pulse echo tools

BENEFITS/pelatihan Menjadi manusia unggul pasti jalan

• Learn how to plan and implement well completions, workovers, stimulation treatments, and routine production operations with an efficiency that increases profits
• Learn about the role of rock mechanics in completions, stimulation, and workovers
• Be able to give suggest or discover the procedures and techniques that increase production and cut operating costs
• Be Able to identify and implement production improvement opportunities that can be carried out by either rig or non-rig well interventions
• Implementation of appropriate technology, either from internal or external sources, in well design, whilst ensuring that the well value is maximised

COURSE OUTLINE/training Oil and gas production system murah

1. GEOLOGICAL CONSIDERATION

• Formation Rock
• Primary and Secondary Migrations
• Reservoir Traps

1. RESERVOIR FUNDAMENTALS THEORY

• The Nature of Rocks and Fluids
• Porosity and Permeability
• Productivity Index
• Volumetric Calculation
• Other Calculations and Decline Curves

1. FLUID FLOW

• Well Productivity
• Choke and Reservoir Fluids
• Inflow and Outflow

1. PRODUCTION OPERATIONS

• Well head and Well Head Equipment
• Multiple Orifice
• Routine Operations
• Opening and Shut-in Well Procedure

1. WELL TESTING AND SATELLITE SYSTEM

• Test Separator Operations and Equipments
• Gas Systems Instruments
• Flare System and Depressurising
• Pigging Techniques and Procedures
• Sampling and Analysis
• BS & W and API Gravity Measurement
• Protective Steam Tracing

1. SURFACE PRODUCTION OPERATIONS

• Process, Level, Temperature and Pressure Controls
• Oil treating , Heater treater and Dehydrator
• Separators, Stage Separators and Sizing
• Two-phase and Three-phase Separation
• Skimmer tank and Flotation unit

1. WELL PROBLEMS

• Low Production and Formation Damage
• Low Reservoir
• Plug-in Tubing or Perforations
• High Viscosity
• High Back Pressure
• Inadequate Artificial Lift
• Water Production and Mechanical Problem
• Protective Steam Tracing

1. PRODUCTION LOGS
2. WELL COMPLETIONS
3. PRIMARY CEMENTING AND SQUEEZE CEMENTING
4. FLUID COMPLETIONS
5. SAND CONTROL
   Gravel Pack, Resin and Fraspac
6. WORKOVERS
7. PARAFFIN AND ASPHALTENES

• Chemical analysis
• Precipitation Mechanism
• The wax and Paraffin Problems

1. OIL EMULSIONS

• Emulsion Built-up and Emulsifying Agent
• Sampling and Analysis
• Emulsion Treating
• Heat and Chemical Treatment
• Electrostatic Coalescing

1. SCALE PROBLEMS

• Scale Composition, Prediction and Identification
• Mechanic and Chemical methods
• Scale Prevention and Inhibitors

1. CORROSION PREVENTIONS

• Basic Theory
• Detection and Measurement
• Prevention and Material Used
• Coating and Chemicals
• Cathodic Protections and inhibitors

JADWAL TRAINING TAMBANG TERBARU 2024/training Oil gas production update

23 – 24 Januari 2024
7 – 8 Februari 2024
6 – 7 Maret 2024
23 – 24 April 2024
7 – 8 Mei 2024 || 21 – 22 Mei 2024
11 – 12 Juni 2024
17 – 18 Juli 2024
21 – 22 Agustus 2024
18 – 19 September 2024
8 – 9 Oktober 2024 || 22 – 23 Oktober 2024
5 – 6 November 2024 || 19 – 20 November 2024
10 – 11 Desember 2024

Catatan : Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta pelatihan.

LOKASI/training Production Jogja

Jakarta : Hotel Amaris Kemang, Amaris Tendean,Trinity Hotel, Ibis Budget.

Bandung : Hotel Santika, Hay Hotel,Ibis Style, Novotel Hotel, Golden Flower Hotel, 1O1 Hotel, Grand Tjokro Hotel, Tune Hotel, Four Point by Sheraton Hotel .

Yogyakarta : Hotel NEO+ Awana, Cordela Hotel,Ibis Style, Boutique Hotel, Cavinton Hotel, Mutiara Hotel, Dafam Malioboro Hotel, Prima Inn Hotel .

Surabaya : Novotel Hotel, Ibis Center Hotel, HARRIS Hotel, Favehotel, Alana Hotel .

Malang : Amaris Hotel, The 1O1 Hotel, Ibis Style Hotel, El Hotel, Whiz Prime Hotel .

Bali : Ibis Kuta, Fontana Hotel, HARRIS Hotel & Conventions .

Lombok : Favehotel, Novotel Lombok, D Praya Hotel .

Investasi training murah :/training Menjadi manusia unggul Bali

Offline Training 6.000.000
Online Training 3.000.000

Syarat dan Ketentuan Berlaku

Investasi pelatihan tersebut menyesuaikan dengan jumlah peserta (on call).
*Please feel free to contact us.

FASILITAS

-FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
-FREE Akomodasi Peserta ke tempat pelatihan
-Module / Handout training
-FREE Flashdisk
-Sertifikat training
-FREE Bag or bagpackers (Tas Training)
-Training Kit (Dokumentasi photo, Blocknote, ATK, etc)