Training Pump Selection, Design And Operation For Oil And Gas Surface Production Facilities

Training Pemilihan Pompa, Desain Dan Operasi Untuk Fasilitas Produksi Permukaan Minyak Dan Gas

Training Oil Surface Production Facilities

Pelatihan Pump Selection, Design And Operation For Oil And Gas Surface Production Facilities Di Bandung

Pembicara / Fasilitator
Dr. Ir. Sudjati Rachmat, DEA graduated from Petroleum Engineering Department of ITB in 1979 and got his Doctorate Degree with honored in 1987 from Ecole Centrale de Lyon I, France . The topic of his thesis is Modelisation Numerique d’Ecoulements Polyphasiques en Milieux Poreux Application au Cas de Calcul des Champs de Pressions et de Saturations dans un Gisement de Petrole.
For the time being, he became a lecturer in Petroleum Engineering Department of ITB. His subjects are Analysis and Numerical Method, Engineering Mathematics, Computer Simulation, Flu id Mechanic, Artificial Intelligence for Petroleum Engineering.
He also gave many courses to the community, such as: basic reservoir engineering and reservoir simulation, basic production engineering, down hole well testing, statistic and numerical method for petroleum engineering, basic log interpretation, etc. He is a member of some profession organization such as: IATMI, SPE/EIME, IMA, HAIAI, FPS-USA, INAGA, and IGA.

After participate in this course, the participants will be able and capable to :
* Understand the basic concept of oil and gas handling with surface processes and operation facilities , and how to operate pump technology in field application.
* Diagnostic of oil and gas flow performance under actual pumping drive mechanism and future performance with current handling processes.
* Analyze the production flow potential of oil and gas flow under actual handling facilities system processes and to plan the better development processes according to fluid flow capacity.
* Understand the fundamentals of microscopic and macroscopic aspects the phenomena of oil and gas handling processes and operation with given surface facilities and pumping system.


* Introduction to Oil and Gas Production Operation

* Oil Surface Production Facilities
o Well Equipments
o Pigging System
o Separator
o Gas Scrubber
o Gas Dehydarator
o Pumps : Centrifugal, Reciprocating, Diaphragm

* Gas Surface Processing Facilities
o Gas Sweetening
o Heat Exchanger
o Fractionation, Liquefaction, Refrigeration System
o Compressor

* Pump Basic Theory
o Centrifugal Pump
o Conservation of Mass
o Specific Velocity
o Pump Performance
o Cavitations

* Pump Specification
o Pump Specification
o Flow Capacity
o Fluid Properties
o Head
o Net Positive Heads
o Rotation Determination and Pump Types
o Viscous Fluid Correction
o Material Selection
o Prime Movers Selection

* Pump Application
o Pump Installation Plan
o Pump Application Example

* Pump Construction
o Pump Classification by Impeller
o Pump Classification by Casing
o Pump Classification by Stage Number
o Pump Classification by Axis Position

* Pump Operation
o Head Capacity Curve
o Parallel and Serial Operation
o Capacity Regulator
o Water Hummer
o Surging
o Pressure Fluctuation
o Automatic Operation

* Pump Instalation
o Horizontal Instalation
o Vertical Instalation
o Submersible Instalation
o Pipping System
o Vibration and Noise Protection

* Pump Maintenance
o First Inspection
o Operation Condition Observation
o Safety Instrument
o Maintenance Management
o Overhaul

* Pump Trouble Shooting
o General Trouble Shooting
o Submersible Pump Trouble Shooting

Jadwal Pelatihan Tambang Training Tahun 2024 :

  • Batch 1 : 23 – 24 Januari 2024
  • Batch 2 : 7 – 8 Februari 2024
  • Batch 3 : 6 – 7 Maret 2024
  • Batch 4 : 23 – 24 April 2024
  • Batch 5 : 7 – 8 Mei 2024 || 21 – 22 Mei 2024
  • Batch 6 : 11 – 12 Juni 2024
  • Batch 7 : 17 – 18 Juli 2024
  • Batch 8 : 21 – 22 Agustus 2024
  • Batch 9 : 18 – 19 September 2024
  • Batch 10 : 8 – 9 Oktober 2024 || 22 – 23 Oktober 2024
  • Batch 11 : 5 – 6 November 2024 || 19 – 20 November 2024
  • Batch 12 : 10 – 11 Desember 2024

Catatan : Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta Training Gas Surface Processing Facilities Pasti Jalan

Invetasi dan Lokasi Pelatihan Oil Surface Production Facilities Di Bandung :

· Yogyakarta, Hotel 101 (6.500.000 IDR / participant)

· Jakarta, Hotel Amaris Kemang (6.500.000 IDR / participant)

· Bandung, Hotel Neo Dipatiukur (6.500.000 IDR / participant)

· Bali, Hotel Ibis Kuta(7.500.000 IDR / participant)

· Surabaya, Hotel Amaris, Ibis Style (6.000.000 IDR / participant)

· Lombok, Sentosa Resort (7.500.000 IDR / participant)

Catatan : Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas  Pelatihan Gas Surface Processing Facilities Di Bandung :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara/Stasiun/Terminal)
  • FREE Akomodasi ke tempat pelatihan bagi peserta Training Oil Surface Production Facilities Bandung Pasti Running
  • Module / Handout Training Pemilihan Pompa, Desain Dan Operasi Untuk Fasilitas Produksi Permukaan Minyak Dan Gas Bandung Fixed Running
  • FREE Flashdisk
  • Sertifikat Training Pump Selection, Design And Operation For Oil And Gas Surface Production Facilities Di Bandung Murah
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive
  • Training room full AC and Multimedia