Training Oil & Gas Surface Facilities

Training Fasilitas Permukaan Minyak & Gas

Training Konsep Dasar Penanganan Minyak Dan Gas Dengan Proses Permukaan Dan Fasilitas Operasi

Description
After participate in this course, the participants will be able and capable to :
* Understand the basic concept of oil and gas handling with surface processes and operation facilities , and how to operate pump technology in field application.
* Diagnostic of oil and gas flow  performance under actual pumping drive mechanism and future performance with current handling processes.
* Analyze the production flow potential of oil and gas flow under actual handling facilities system processes and to plan the better development processes according to fluid flow capacity.
* Understand the fundamentals of microscopic and macroscopic aspects the phenomena of oil and gas handling processes and operation with given surface facilities and pumping system

Course Content
1. Introduction to Oil and Gas Production Operation
2. Oil Surface Production Facilities
+ Well Equipments
+ Pigging System
+ Separator
+ Gas Scrubber
+ Gas Dehydarator
+ Pumps : Centrifugal, Reciprocating, Diaphragm
3. Gas Surface Processing Facilities
+ Gas Sweetening
+ Heat Exchanger
+ Fractionation, Liquefaction, Refrigeration System
+ Compressor
4. Pump Basic Theory
+ Centrifugal Pump
+ Conservation of Mass
+ Specific Velocity
+ Pump Performance
+ Cavitations
5. Pump Specification
+ Pump Specification
+ Flow Capacity
+ Fluid Properties
+ Head
+ Net Positive Heads
+ Rotation Determination and Pump Types
+ Viscous Fluid Correction
+ Material Selection
+ Prime Movers Selection
6. Pump Application
+ Pump Installation Plan
+ Pump Application Example
7. Pump Contruction
+ Pump Classification by Impeller
+ Pump Classification by Casing
+ Pump Classification by Stage Number
+ Pump Classification by Axis Position
8. Pump Operation
+ Head Capacity Curve
+ Parallel and Serial Operation
+ Capacity Regulator
+ Water Hummer
+ Surging
+ Pressure Fluctuation
+ Automatic Operation
9. Pump Instalation
+ Horizontal Instalation
+ Vertical Instalation
+ Submersible Instalation
+ Pipping System
+ Vibration and Noise Protection
10. Pump Maintenance
+ First Inspection
+ Operation Condition Observation
+ Safety Instrument
+ Maintenance Management
+ Overhaul
11. Pump Trouble Shooting
+ General Trouble Shooting
+ Submersible Pump Trouble Shooting

Who Sould Attend
Technical and non-technical personnel of Oil & Gas Company who involves in or concern with daily onshore & offshore oil & gas surface production facility and equipment operation and maintenance and those who responsible of the continuity and integrity of the surface production and processing operation.

Coordinator
Ir. Wibowo, MT
S2 – ITB, Magister (MS), S1 Teknik Perminyakan UPN Yogyakarta
Geothermal Technology : Teaching the Teachers I & III, Geothermal Institute, The University of Auckland – BPPT – ITB, Juli 1995 & 1996, Oil and Gas Pipeline Transportation System Design, IWPL – IATMI, Preparing Data for Reservoir Simulation dan Water Flooding, Texas A&M Univ. – ITB, Geostatistical Methods in Reservoir Characterization, The Use of Fractals for Reservoir Characterization and EOR Processes, USC – ITB

Pengalaman Kerja dan Profesi  : Studi Analisis Memory Production Log Test (MPLT), PT. Nesitor Jakarta, 2006, Ahli Utama Teknik (Senior Petroleum Engineer) bidang Teknik Reservoir Migas pada PT. Schlumberger Geophysics Nusantara, untuk Bidang Keteknikan Reservoir PT. Pertamina (Persero) DOH-Jawa

Facilities
* Module
* Certificate
* Souvenir
* Training Kit

Course Methode
* Presentation
* Discussion
* Case Study
* Simulation
* Practice
* Evaluation

Jadwal Pelatihan Tambang Training Tahun 2024 :

• Batch 1 : 23 – 24 Januari 2024
• Batch 2 : 7 – 8 Februari 2024
• Batch 3 : 6 – 7 Maret 2024
• Batch 4 : 23 – 24 April 2024
• Batch 5 : 7 – 8 Mei 2024 || 21 – 22 Mei 2024
• Batch 6 : 11 – 12 Juni 2024
• Batch 7 : 17 – 18 Juli 2024
• Batch 8 : 21 – 22 Agustus 2024
• Batch 9 : 18 – 19 September 2024
• Batch 10 : 8 – 9 Oktober 2024 || 22 – 23 Oktober 2024
• Batch 11 : 5 – 6 November 2024 || 19 – 20 November 2024
• Batch 12 : 10 – 11 Desember 2024

Catatan : Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta Training Pengantar Operasi Produksi Minyak Dan Gas Pasti Jalan

Invetasi dan Lokasi Pelatihan Konsep Dasar Penanganan Minyak Dan Gas Dengan Proses Permukaan Dan Fasilitas Operasi Di Jogja :

· Yogyakarta, Hotel 101 (6.500.000 IDR / participant)

· Jakarta, Hotel Amaris Kemang (6.500.000 IDR / participant)

· Bandung, Hotel Neo Dipatiukur (6.500.000 IDR / participant)

· Bali, Hotel Ibis Kuta(7.500.000 IDR / participant)

· Surabaya, Hotel Amaris, Ibis Style (6.000.000 IDR / participant)

· Lombok, Sentosa Resort (7.500.000 IDR / participant)

Catatan : Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas  pelatihan Pengantar Operasi Produksi Minyak dan Gas di jogja :

• • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara/Stasiun/Terminal)
  • FREE Akomodasi ke tempat pelatihan bagi peserta training Konsep dasar penanganan minyak dan gas dengan proses permukaan dan fasilitas operasi jogja pasti running
  • Module / Handout Training Fasilitas Permukaan Minyak & Gas Jogja Fixed Running
  • FREE Flashdisk
  • Sertifikat Training Oil & Gas Surface Facilities Di Jogja Murah
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive
  • Training room full AC and Multimedia