Training Oil And Water Handling Facilities

Training Fasilitas Pengendalian Minyak Dan Air

Training Oil Well Surface Production Equipment And Operation

TRAINING OBJECTIVES :

After participate in this course, the participants will be able and capable to :
* Understand the basic concept of oil , gas and water handling processes and facilities, and how to operate this technology in field application.
* Diagnostic of oil and gas reservoir performance under actual drive mechanism and future performance with current handling processes.
* Analyze the production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity.
* Understand the fundamentals of microscopic and macroscopic aspects and phenomena of oil, gas and water handling processes.

TRAINING MATERIAL OUTLINE:

Oil Handling Facilities
* Oil Well Surface Production Equipment and Operation

1. Oil Well Equipment
2. Oil Well Production Operation
3. Well Automatic Safety Device

* Oil Gathering System. Manifold and Flowline

1. Oil Gathering System
2. Manifold System
3. Flow line Sizing and Design

* Crude Oil and Gas Separation

1. Separator and Principle of Separation
2. Design of Separator
3. Oil Dehydration

Water Handling Facilities
* The Chemistry of Water

1. Chemical and Physical Properties
2. Water Sampling Procedures
3. Quantitative Analysis of Oilfield Waters
4. Water Analysis Techniques

* Water Formed Scales

1. Why Scales Form
2. Predicting Scale Formation
3. Mixing Waters – Compatibility
4. Preventing Scale Formation
5. Scale Removal Methods

* Corrosion in Water Injection System and Disposal System

1. Theory of Corrosion
2. The Effect of Metal Composition
3. Effect of Water Composition
4. Forms of Corrosion
5. Corrosion Control Methods
6. Corrosion Inhibitors
7. Internal Coatings and Linings for Tubular Goods
8. Internal Tank Coatings and Cathodic Protection
9. Removal of Corrosive Gases from Water
10. Oxygen Removal
11. Removal of Hydrogen Sulfide from Water
12. Removal of Carbon Dioxide from Water
13. Design to Minimize Corrosion
14. Corrosion Monitoring Techniques

WHO SHOULD ATTEND?

No specified  (Operator/Sr. Operator/Engineer or Non Engineer)

INSTRUCTOR :

Ir. M. Syahri, MT, Ph.Dand Team

Ir. M. Syahri, MT, Ph.D  is alumnus from UPN “Veteran” Yogyakarta (UPNYK) and Institute of Technology (ITB) department of Chemical Engineering. Also alumnus from University Kebangsaan Malaysia (UKM) department Mechanical and Material Engineering. He has been as researcher at Oil and Gas; Renewable Energy Laboratory UPNYK, he is also being as Senior Surface Facility Engineer in some project and Training Instructor. Some projects have been handled by him such as Senior Surface Facility Engineer, Plant of Development TAC Ramba-Pertamina Field, Sumbagsel (2008); Plant of Further Development East Pamanukan Field, Pertamina DOH Cirebon – Rainbow Emerald (2007); Plant of Further Development Nglobo Field, Pertamina DOH JBT – Cepu (2005); Plant of Further Development Ketaling Barat Field, Pertamina DOH Sumbagteng – Jambi (2005); Also as Reviewer Team BP MIGAS, East Kalimantan Gas Deliverability (Vico, Chevron, TOTAL) (2007).He also gave many courses to the companies, such as: Basic Ammonia Storage,
Transfer Equipment and Major Hazards Impact; Dehydration Process (Oil and Gas Operation); Clean Water Processing & Treatment for Industrial Application; Principle of Chemical Process Industry for non Engineer; Boiler Feed Water Treatment & Trouble shooting; Hazarous Materials Safe Handling;Basic Principle For steam Reformer, Shift Reaction, Operability Problem & trouble shooting; CO2 Removal Technology (Absorber, Striper) Trouble shooting and Operability impact; Catalitic Reactor in Ammonia Industry (Desulfurizer, Methanator, Steam Reformer, Ammonia Converter); Basic Fundamental Ammonia Synthesis, ARU And Process in Middle End Area; Inspection of Insulated Pipes Defects and Repairs Techniques; Emergency Handling in Ammonia Industry; etc.

Jadwal Pelatihan Tambang Training Tahun 2024 :

• Batch 1 : 23 – 24 Januari 2024
• Batch 2 : 7 – 8 Februari 2024
• Batch 3 : 6 – 7 Maret 2024
• Batch 4 : 23 – 24 April 2024
• Batch 5 : 7 – 8 Mei 2024 || 21 – 22 Mei 2024
• Batch 6 : 11 – 12 Juni 2024
• Batch 7 : 17 – 18 Juli 2024
• Batch 8 : 21 – 22 Agustus 2024
• Batch 9 : 18 – 19 September 2024
• Batch 10 : 8 – 9 Oktober 2024 || 22 – 23 Oktober 2024
• Batch 11 : 5 – 6 November 2024 || 19 – 20 November 2024
• Batch 12 : 10 – 11 Desember 2024

Catatan : Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta Training Operasi Produksi Pasti Jalan

Invetasi dan Lokasi Pelatihan Oil Well Surface Production Equipment And Operation Di Jogja :

· Yogyakarta, Hotel 101 (6.500.000 IDR / participant)

· Jakarta, Hotel Amaris Kemang (6.500.000 IDR / participant)

· Bandung, Hotel Neo Dipatiukur (6.500.000 IDR / participant)

· Bali, Hotel Ibis Kuta(7.500.000 IDR / participant)

· Surabaya, Hotel Amaris, Ibis Style (6.000.000 IDR / participant)

· Lombok, Sentosa Resort (7.500.000 IDR / participant)

Catatan : Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas  pelatihan Operasi produksi di jogja :

• FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara/Stasiun/Terminal)
• FREE Akomodasi ke tempat pelatihan bagi peserta training Oil well surface production equipment and operation jogja pasti running
• Module / Handout Training Fasilitas Pengendalian Minyak Dan Air Jogja Fixed Running
• FREE Flashdisk
• Sertifikat Training Oil And Water Handling Facilities Di Jogja Murah
• FREE Bag or bagpackers (Tas Training)
• Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
• 2xCoffe Break & 1 Lunch, Dinner
• FREE Souvenir Exclusive
• Training room full AC and Multimedia