Training Hysis Field Process Engineering Design For Oil Gas

Training Desain Teknik Proses Hysys Lapangan Untuk Gas Minyak

Training Component And Component Behavior

Pelatihan Hysis Field Process Engineering Design For Oil Gas Di Jogja

OBJECTIVES
1. Understand the basic concept of oil , gas and water handling processes and facilities, and how to operate this technology in field application.
2. Diagnostic of oil and gas reservoir performance under actual drive mechanism and future performance with current handling processes.
3. Analyze the production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity.
4. Understand the fundamentals of microscopic and macroscopic aspects and phenomena of oil, gas and water handling processes.

TRAINING OUTLINES

Introduction
1. The role and responsibility of each member of discipline
2. The different type of project that proses engineering are involved with
3. The complexities of a project
4. A basic understanding of the deliverables each type of project.
5. A basic understanding of the schedule for the different type of project

Process Simulator
1. What is process simulator
1. What are they
2. How they are used
3. How to determine the suitable one
2. Process simulator needs
1. Component and component behavior
2. Process flowsheet or description
3. Operating condition or design specification
4. Calculate steady state process of heat and mass flow
5. Model the surface facilities and gas plant
6. Design or process evaluation
3. Step to modular simulation(Hysis)
1. Specify component and thermodynamic model
2. Define process configuration
3. Specify stream or unit operation connectivity
4. Operation parameters are ready
5. Run simulation
6. Result Checking
7. Check the simulation result is in line with the real design practice
8. Verify the result

Process Simulation Unit Operation
1. Select Hysis calculation block to represent process equipment
2. Understanding of unit operation in Hysis
3. Understanding single stage separation in Hysis

Process Simulation – Set & Adjust
1. Describe the characteristic of feed forward controller
2. Describe the characteristic of feedback controller
3. Understand how to use SET as feed forward controller
4. Understand how to ADJUST as feedback controller

Process Simulation – Crude Stabilizer
1. Understand stream mixing and splitting block
2. Understand pressure change block
3. Select suitable heat transfer block
4. Model a simple crude stabilizer

Recycle Stream
1. Select suitable tear stream
2. Installing recycle loop stream

INSTRUKTUR

Sigit Budi, ST., MT and team

PARTICIPANTS

Senior operators, Junior operators, Junior production engineers and supervisors, Well service engineers and supervisors, Materials, Logistics and warehouse personnel, Work over and Well services engineers and supervisors

METODE

Lecturing, presentasi, diskusi interaktif, sharing, studi kasus

Jadwal Pelatihan Tambang Training Tahun 2024 :

  • Batch 1 : 23 – 24 Januari 2024
  • Batch 2 : 7 – 8 Februari 2024
  • Batch 3 : 6 – 7 Maret 2024
  • Batch 4 : 23 – 24 April 2024
  • Batch 5 : 7 – 8 Mei 2024 || 21 – 22 Mei 2024
  • Batch 6 : 11 – 12 Juni 2024
  • Batch 7 : 17 – 18 Juli 2024
  • Batch 8 : 21 – 22 Agustus 2024
  • Batch 9 : 18 – 19 September 2024
  • Batch 10 : 8 – 9 Oktober 2024 || 22 – 23 Oktober 2024
  • Batch 11 : 5 – 6 November 2024 || 19 – 20 November 2024
  • Batch 12 : 10 – 11 Desember 2024

Catatan : Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta Training Calculate Steady State Process Of Heat And Mass Flow Pasti Jalan

Invetasi dan Lokasi Pelatihan Component And Component Behavior Di Jogja :

· Yogyakarta, Hotel 101 (6.500.000 IDR / participant)

· Jakarta, Hotel Amaris Kemang (6.500.000 IDR / participant)

· Bandung, Hotel Neo Dipatiukur (6.500.000 IDR / participant)

· Bali, Hotel Ibis Kuta(7.500.000 IDR / participant)

· Surabaya, Hotel Amaris, Ibis Style (6.000.000 IDR / participant)

· Lombok, Sentosa Resort (7.500.000 IDR / participant)

Catatan : Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas  pelatihan Calculate steady state process of heat and mass flow di jogja :

    • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara/Stasiun/Terminal)
    • FREE Akomodasi ke tempat pelatihan bagi peserta training Component and component behavior jogja pasti running
    • Module / Handout Training Desain Teknik Proses Hysys Lapangan Untuk Gas Minyak Jogja Fixed Running
    • FREE Flashdisk
    • Sertifikat Training Hysis Field Process Engineering Design For Oil Gas Di Jogja Murah
    • FREE Bag or bagpackers (Tas Training)
    • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
    • 2xCoffe Break & 1 Lunch, Dinner
    • FREE Souvenir Exclusive
    • Training room full AC and Multimedia
Post Views: 108