Training Gas, Oil And Water Handling Facilities
Training Fasilitas Penanganan Minyak Gas, Minyak Dan Air
Training Gas Handling Facilities
OBJECTIVES :
After participate in this course, the participants will be able and capable to :
* Understand the basic concept of oil , gas and water handling processes and facilities, and how to operate this technology in field application.
* Diagnostic of oil and gas reservoir performance under actual drive mechanism and future performance with current handling processes.
* Analyze the production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity.
* Understand the fundamentals of microscopic and macroscopic aspects and phenomena of oil, gas and water handling processes.
AUDIENCE:
No specified (Operator/Sr. Operator/Engineer or Non Engineer)
COURSE OUT-LINE:
1. Gas Handling Facilities
* Introduction to Gas Handling and Facilities
* Gas Properties
* Ideal gas
* Real Gas
* Gas Formation Volume Factor
* Gas Compressibility
* Gas-Water System
* Gas-Condensate System
* Gas Reservoir Performance
* Reservoir Gas Flow
* Gas Reserves
* Well Completion Effect
* Tight Gas Well
* Gas Well Testing
* Gas Piping System
* Basic Flow Equation
* Flow in Wells and Flow in Pipelines
* Effect of Liquids
* Use of Pressure Traverse Curve
* Liquid Removal from Gas Wells
* Gas Compression
* Type of Compressors
* Compressor Design
* Centrifugal Compressor
* Total System Analysis
* Tubing and Flow Line Effect
* Separator Pressure Effect
* Compressor Selection
* Flow Measuring
* Orifice Metering
* Metering System Design
* Other Metering Methods
* Gas Condensate Reservoir
* Well Testing and Sampling
* Gas Cycling
* Field Operation Problems
* Pressure Cumulative Production Plot
* Hydrate Formation
* Sour Gas Production
* Corrosion Control With Inhibitors
* Sulfur Deposition
* Gas Processing
* Field treatment of Natural Gas
* Gas Plant Operation
* Gas Dehydration
* Gas Sweetening
2. Oil Handling Facilities
* Oil Well Surface Production Equipment and Operation
* Oil Well Equipment
* Oil Well Production Operation
* Well Automatic Safety Device
* Oil Gathering System. Manifold and Flowline
* Oil Gathering System
* Manifold System
* Flow line Sizing and Design
* Crude Oil and Gas Separation
* Separator and Principle of Separation
* Design of Separator
* Oil Dehydration
* Principles of Measurement
* Introduction to Measurement
* Crude Oil Measurement
* Gas Measurement
* Well Test
* Introduction
* Responsibility for Test
* Preparation for Test
* Types of Well Test
* Equipment and Procedures
* Accuracy of Fluid Measurement
* Problem in Testing
* Type of Test
3. Water Handling Facilities
* The Chemistry of Water
* Chemical and Physical Properties
* Water Sampling Procedures
* Quantitative Analysis of Oilfield Waters
* Water Analysis Techniques
* Water Formed Scales
* Why Scales Form
* Predicting Scale Formation
* Mixing Waters – Compatibility
* Preventing Scale Formation
* Scale Removal Methods
* Corrosion in Water Injection System and Disposal System
* Theory of Corrosion
* The Effect of Metal Composition
* Effect of Water Composition
* Forms of Corrosion
* Corrosion Control Methods
* Corrosion Inhibitors
* Internal Coatings and Linings for Tubular Goods
* Internal Tank Coatings and Cathodic Protection
* Non-Metallic Tubular Goods Types
* Removal of Corrosive Gases from Water
* Oxygen Removal
* Removal of Hydrogen Sulfide from Water
* Removal of Carbon Dioxide from Water
* Oxygen Exclusion
* Design to Minimize Corrosion
* Corrosion Monitoring Techniques
INSTRUCTOR :
1. Dr.Ir. Sudjati Rachmat, DEA
CO-INSTRUCTOR :
2. Ir. Gilang Erlangga
Jadwal Pelatihan Tambang Training Tahun 2024 :
- Batch 1 : 23 – 24 Januari 2024
- Batch 2 : 7 – 8 Februari 2024
- Batch 3 : 6 – 7 Maret 2024
- Batch 4 : 23 – 24 April 2024
- Batch 5 : 7 – 8 Mei 2024 || 21 – 22 Mei 2024
- Batch 6 : 11 – 12 Juni 2024
- Batch 7 : 17 – 18 Juli 2024
- Batch 8 : 21 – 22 Agustus 2024
- Batch 9 : 18 – 19 September 2024
- Batch 10 : 8 – 9 Oktober 2024 || 22 – 23 Oktober 2024
- Batch 11 : 5 – 6 November 2024 || 19 – 20 November 2024
- Batch 12 : 10 – 11 Desember 2024
Catatan : Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta Training Basic Flow Equation Pasti Jalan
Invetasi dan Lokasi Pelatihan Gas Handling Facilities Di Jogja :
· Yogyakarta, Hotel 101 (6.500.000 IDR / participant)
· Jakarta, Hotel Amaris Kemang (6.500.000 IDR / participant)
· Bandung, Hotel Neo Dipatiukur (6.500.000 IDR / participant)
· Bali, Hotel Ibis Kuta(7.500.000 IDR / participant)
· Surabaya, Hotel Amaris, Ibis Style (6.000.000 IDR / participant)
· Lombok, Sentosa Resort (7.500.000 IDR / participant)
Catatan : Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.
Fasilitas pelatihan Basic Flow Equation di jogja :
-
- FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara/Stasiun/Terminal)
- FREE Akomodasi ke tempat pelatihan bagi peserta training Gas Handling Facilities jogja pasti running
- Module / Handout Training Fasilitas Penanganan Minyak Gas, Minyak Dan Air Jogja Fixed Running
- FREE Flashdisk
- Sertifikat Training Gas, Oil And Water Handling Facilities Di Jogja Murah
- FREE Bag or bagpackers (Tas Training)
- Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
- 2xCoffe Break & 1 Lunch, Dinner
- FREE Souvenir Exclusive
- Training room full AC and Multimedia