Breaking News

Training Gas Compression & Flow Metering

Training Gas Compression & Flow Metering

Training Kompresi Gas & Pengukur Aliran

Training Reciprocating Compressors

Pelatihan Gas Compression & Flow Metering Di Jogja

Gas production operations often require compressors to raise the pressure of the gas. This is accompanied by change of state of the gas which means change in temperature and volume of a quantum of gas going under compression . The most important ofcompressors such as providing enough pressure to a gas transport through transmission and distribution systems, reinjection of gas for pressure maintenance, circulation of gas through the process or system, raising gas pressure to the required level for a chemical processing reaction,etc. The compression calculations in the natural gas industry must be accurate and its of paramount importance for the gas industry. If an error occurs even though only 1.0 percent in the measurement of natural gas in the pipeline, this will give a loss either the seller or the purchaser amount of million a year, and certainly this is a bad thing and can be detrimental to the oil & gas company. Not only compression calculation but also the accuration of flow metering is
importance. The Flow is one of the most difficult variable to measure, because it cannot be measured directly like pressure and temperature. It must be inferred by indirect means, such as pressure differential over a specified distance, speed of rotation of a rotating element, displacement rate in a measurement chamber, etc.

Course Outlines Gas Compression & Flow Metering:

Day 1

Overview of Gas Compression
* Field gas compression systems.
* Inlet gas compression prior to treating.
* Outlet gas compression prior to export pipeline.
* Compression for gas lift, gas gathering, condensate recovery,

transmission & distribution, gas re-injection & pressure maintenance.

Type of Compressor
* Positive-displacement or intermittent
* Flow and continuous flow units.
* Reciprocating compressors.
* Rotary positive-displacement and centrifugal compressors.
* Axial and mixed-flow compressors.
* Comparison between compressors and compressor selection.

Day 2

Basics and Performance of Gas Compression
* Isothermal, isentropic and polytropic ideal compression processes.
* Real gas behavior and compression ratio.
* Design and determination of the number of stages.
* Inlet flow rate and compression power calculation.
* Compressor control and performance maps.
* Nomograph for estimating compressor performance.
* Estimation of HP required for compressing natural gas.
* Performance testing guidelines for centrifugal compressors.

Day 3

Practical Guide to Accurate Flow Measurement.
* Requisites of flow measurement and reference standards .
* Custody and non-custody transfer.
* Flow installation requirements and operational considerations.
* Maintenance meter equipment, readouts and related devices.
* Proving systems and auditing.
* Accuracy, rangability and turndown.
* Head type and mechanical type.
* Electronic flowmeter and mass flowmeter.

Day 4

Practical Aspects of Flow Metering.
* Orifice plate, venturi, flow nozzle and Pitot tube.
* Variables area meters.
* Mechanical flowmeters.
* Turbin and rotary flowmeters.
* Electronic and vortex flowmeters.
* Ultrasonic flowmeters.
* Mass flowmeters.
* Coriolis flowmeters.
* Thermal mass flowmeters.


Hilman Ahmad

This course will be conducted by Hilman Ahmad & Associates, an Independent Consultant in industrial oil and gas, member of the Society of Indonesian Petroleum Engineers, who manage the Bandung Industrial Oil & Gas Education Center.

He has been practicing production operation and corrosion control engineering in Indonesia for more than twenty-five years. He post-graduated from Tokyo Institute of Technology (sponsored by UNESCO) in 1977. He joined in-field-practice program at Nippon Kokan Steel Company & Research Center Kawasaki, Japan for production facility design & construction and corrosion prevention & control in 1983, and collaborated with Cormon Industrial Research Center Brighton UK for on-line corrosion monitoring development in 2000.

He has been delivering training course in production operation and maintenance and corrosion control for personnel from Oil & Gas Company and Petrochemical Industry since 1979.

Jadwal Pelatihan Tambang Training Tahun 2023 :

  • Batch 1 : 24 – 26 Januari 2023
  • Batch 2 : 14 – 16 Februari 2023
  • Batch 3 : 20 – 23 Maret 2023
  • Batch 4 : 4 – 6 April 2023
  • Batch 5 : 5 – 17 Mei 2023
  • Batch 6 : 26 – 28 Juni 2023
  • Batch 7 : 17 – 19 Juli 2023
  • Batch 8 : 14 – 16 Agustus 2023
  • Batch 9 : 25 – 27 September 2023
  • Batch 10 : 10 – 12 Oktober 2023
  • Batch 11 : 7 – 9 November 2023
  • Batch 12 : 5 – 7 Desember 2023

Catatan : Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta Training Real Gas Behavior And Compression Ratio Pasti Jalan

Invetasi dan Lokasi Pelatihan Reciprocating Compressors Di Jogja :

· Yogyakarta, Hotel 101 (6.500.000 IDR / participant)

· Jakarta, Hotel Amaris Kemang (6.500.000 IDR / participant)

· Bandung, Hotel Neo Dipatiukur (6.500.000 IDR / participant)

· Bali, Hotel Ibis Kuta(7.500.000 IDR / participant)

· Surabaya, Hotel Amaris, Ibis Style (6.000.000 IDR / participant)

· Lombok, Sentosa Resort (7.500.000 IDR / participant)

Catatan : Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas  pelatihan Real gas behavior and compression ratio di jogja :

    • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara/Stasiun/Terminal)
    • FREE Akomodasi ke tempat pelatihan bagi peserta training Reciprocating compressors jogja pasti running
    • Module / Handout Training Kompresi Gas & Pengukur Aliran Jogja Fixed Running
    • FREE Flashdisk
    • Sertifikat Training Gas Compression & Flow Metering Di Jogja Murah
    • FREE Bag or bagpackers (Tas Training)
    • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
    • 2xCoffe Break & 1 Lunch, Dinner
    • FREE Souvenir Exclusive
    • Training room full AC and Multimedia
Tanyakan pada kami ?

Kami di sini untuk membantu Anda! Jangan ragu untuk menanyakan apapun kepada kami. Klik di bawah untuk memulai obrolan.

Customer Support







Hi, What can i do for you? 00.00


Hai, tanyakan pada kami ? 00.00