Training Advanced Oil And Gas Production System

Training Oil And Gas Production System

Training Oil Gas Production

Pembicara / Fasilitator
Dr.Ir. Sudjati Rachmat, DEA. adalah dosen di jurusan perminyakan ITB sejak tahun 1979 sampai sekarang. Beliau alumnus dari ITB lulus tahun 1977, kemudian melanjutkan pendidikannya di Diplome d’Etude Approfondie Ecole Centrale de Lyon, UCB Lyon I, FRANCE. Dan pada tahun 1985 – 1987 beliau mengambil program Docteur en Mecanique de Fluide (Methode Numerique) Ecole Centrale de Lyon, UCB Lyon I, FRANCE.
Dr. Sudjati Rachmat sering menjadi instruktur dalam banyak pelatihan yang berkaitan dengan perminyakan untuk perusahaan di seluruh Indonesia, diantaranya seperti Pertamina, Chevron, Badak LNG, Total, Vico, Mobil Oil Indonesia, Ministery of Mining and Energy, Unocal Indonesia, Lemigas, IATMI-IWPL Migas, PPTM Migas, PT Caltex Pacific Indonesia, Gulf, Arco, dll.

Topik-topik training yang Beliau sampaikan diantaranya adalah production surface and down hole equipment, Basic Reservoir Engineering, Sucker Rod Pumping Theory and Practice, Production Logging Engineering, Nodal Analysis and Production Optimization, Well Test, Operation and Interpretation, Well Design, Completion and Workover, Numerical and Statistical Method for Petroleum Engineering Problems, Oil-Well Stimulation, Hydraulic Fracturing, Statistics for Petroleum Engineering, Reservoir Simulation for Enhanced Oil Recovery, Applied Reservoir Engineering and Reservoir Simulation, Aspects of Horizontal Well Technology, Geology and Geophysics Modeling, Advanced Programming on Numerical Analysis and Industrial Information System, Management Information System, Well Stimulation of Oil and Gas Reservoir, Horizontal Well Technology, Transportation of Oil and Gas, Sand Control Technology, dan lain-lain.
Beliau banyak melakukan penelitian di bidang MIGAS dan telah mempublikasikan dan menseminarkannya di forum dunia.

ABOUT THE COURSE
The rapidly increasing worldwide demand for natural gas as an energy source requires expertise in gas engineering technology. Incorporating a balance between theory and application, course emphasis is on training participants for immediate application of acquired techniques to field problems.

Production is defined as the operations involved in bringing well fluids to the surface and preparing the fluids for transport to a refinery via pipelines or trucks. The first step in production is to start the well fluids flowing to the surface (called “well completion”). Well servicing and workover consists of performing routine maintenance operations (such replacing worn or malfunctioning equipment) and performing more extensive repairs, respectively. Well servicing and workover are an intermittent step and necessary to maintain the flow of oil and gas. Next, the fluid must be separated into its components of oil, gas, and water; stored; and treated (for purification), measured, and tested before being transported to the refinery.

This training will provide the principle and yet some practical and theoretical aspect that can be applied on daily work faced by production engineers and supervisor in the oil industry.
Jadwal Lainnya :
Petty Cash Management & Administration (BANDUNG)

SUBJECT LEARNED
1. All aspects of completions are covered in sufficient detail to permit participants to review his/her current practices
2. The fundamental concepts of production operations and their proper application in the field
3. Production equipment such as wellhead, tubing and packers, well completions and workover as well as well test and problems, production logging and cementing will also covered
4. Production logs and how and when to use them; evaluation techniques for cement bond logs and pulse echo tools

BENEFITS
* Learn how to plan and implement well completions, workovers, stimulation treatments, and routine production operations with an efficiency that increases profits
* Learn about the role of rock mechanics in completions, stimulation, and workovers
* Be able to give suggest or discover the procedures and techniques that increase production and cut operating costs
* Be Able to identify and implement production improvement opportunities that can be carried out by either rig or non-rig well interventions
* Implementation of appropriate technology, either from internal or external sources, in well design, whilst ensuring that the well value is maximised

COURSE OUTLINE
1. GEOLOGICAL CONSIDERATION
+ Formation Rock
+ Primary and Secondary Migrations
+ Reservoir Traps
2. RESERVOIR FUNDAMENTALS THEORY
+ The Nature of Rocks and Fluids
+ Porosity and Permeability
+ Productivity Index
+ Volumetric Calculation
+ Other Calculations and Decline Curves
3. FLUID FLOW
+ Well Productivity
+ Choke and Reservoir Fluids
+ Inflow and Outflow
4. PRODUCTION OPERATIONS
+ Well head and Well Head Equipment
+ Multiple Orifice
+ Routine Operations
+ Opening and Shut-in Well Procedure
5. WELL TESTING AND SATELLITE SYSTEM
+ Test Separator Operations and Equipments
+ Gas Systems Instruments
+ Flare System and Depressurising
+ Pigging Techniques and Procedures
+ Sampling and Analysis
+ BS & W and API Gravity Measurement
+ Protective Steam Tracing
6. SURFACE PRODUCTION OPERATIONS
+ Process, Level, Temperature and Pressure Controls
+ Oil treating , Heater treater and Dehydrator
+ Separators, Stage Separators and Sizing
+ Two-phase and Three-phase Separation
+ Skimmer tank and Flotation unit
7. WELL PROBLEMS
+ Low Production and Formation Damage
+ Low Reservoir
+ Plug-in Tubing or Perforations
+ High Viscosity
+ High Back Pressure
+ Inadequate Artificial Lift
+ Water Production and Mechanical Problem
+ Protective Steam Tracing
8. PRODUCTION LOGS
9. WELL COMPLETIONS
10. PRIMARY CEMENTING AND SQUEEZE CEMENTING
11. FLUID COMPLETIONS
12. SAND CONTROL
Gravel Pack, Resin and Fraspac
13. WORKOVERS
14. PARAFFIN AND ASPHALTENES
+ Chemical analysis
+ Precipitation Mechanism
+ The wax and Paraffin Problems
15. OIL EMULSIONS
+ Emulsion Built-up and Emulsifying Agent
+ Sampling and Analysis
+ Emulsion Treating
+ Heat and Chemical Treatment
+ Electrostatic Coalescing
16. SCALE PROBLEMS
+ Scale Composition, Prediction and Identification
+ Mechanic and Chemical methods
+ Scale Prevention and Inhibitors
17. CORROSION PREVENTIONS
+ Basic Theory
+ Detection and Measurement
+ Prevention and Material Used
+ Coating and Chemicals
+ Cathodic Protections and inhibitors

Program ini dirancang untuk :
* Production, Operations, Facilities and Senior Petroleum Engineers
* Surface Equipment Technicians, Technical or Reservoir Engineers
* Supervisory Personnel who interact with field facility engineers/operators
* Production Managers and Field Production Supervisors
* Engineers and other personnel involved with the daily operation and management of producing oil and gas wells.

Jadwal Pelatihan Tambang Training Tahun 2024 :

• Batch 1 : 23 – 24 Januari 2024
• Batch 2 : 7 – 8 Februari 2024
• Batch 3 : 6 – 7 Maret 2024
• Batch 4 : 23 – 24 April 2024
• Batch 5 : 7 – 8 Mei 2024 || 21 – 22 Mei 2024
• Batch 6 : 11 – 12 Juni 2024
• Batch 7 : 17 – 18 Juli 2024
• Batch 8 : 21 – 22 Agustus 2024
• Batch 9 : 18 – 19 September 2024
• Batch 10 : 8 – 9 Oktober 2024 || 22 – 23 Oktober 2024
• Batch 11 : 5 – 6 November 2024 || 19 – 20 November 2024
• Batch 12 : 10 – 11 Desember 2024

Catatan : Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta Training Production Pasti Jalan

Invetasi dan Lokasi Pelatihan Oil Gas Production Di Jogja :

· Yogyakarta, Hotel 101 (6.500.000 IDR / participant)

· Jakarta, Hotel Amaris Kemang (6.500.000 IDR / participant)

· Bandung, Hotel Neo Dipatiukur (6.500.000 IDR / participant)

· Bali, Hotel Ibis Kuta(7.500.000 IDR / participant)

· Surabaya, Hotel Amaris, Ibis Style (6.000.000 IDR / participant)

· Lombok, Sentosa Resort (7.500.000 IDR / participant)

Catatan : Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas  pelatihan production di jogja :

• • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara/Stasiun/Terminal)
  • FREE Akomodasi ke tempat pelatihan bagi peserta training oil gas production jogja pasti running
  • Module / Handout Training Oil And Gas Production System Jogja Fixed Running
  • FREE Flashdisk
  • Sertifikat Training Advanced Oil And Gas Production System Di Jogja Murah
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive
  • Training room full AC and Multimedia